If you are unable to connect to your Netgear WiFi router, then the first thing that you need to check is the firmware of your device. Chances are that an outdated firmware is preventing you from connecting to your WiFi device. To ensure that you can connect to your router in peace, it is recommended that you perform Netgear router firmware update.
For those of you who are wondering how to do that, know that this article will help you. Here, we’ve mentioned the step-by-step instructions that’ll assist you in updating the firmware of your router to its latest version. So, read on.
Steps to Update the Firmware of Your Netgear WiFi Router
Here are the steps that you need to follow to update your Netgear WiFi device:
- Power on your Netgear WiFi router and use a cable to connect it to the modem.
- You also have the option of connecting your devices wirelessly.
- Open up a web browser on your laptop and type routerlogin.net in the URL bar.
- Then, fill in the default routerlogin.net admin password and username.
- Clicking on the Log In button will take you to the Netgear Genie setup wizard.
- Go to Settings > Administration or Advanced > Administration.
- Select the Firmware Update button.
If you carefully follow these instructions, you’ll surely be able to update the firmware of your Netgear WiFi router. On the off chance, if you fail to update your device, it might be due to the following reasons:
- Loose cable connections
- Poor internet connection
- The connection between your router and modem isn’t good
- The Ethernet cable is damaged
- Interference in the WiFi signals of your home router
Now that you know what led to the Netgear router firmware update failure, let’s take a look at the steps given below to troubleshoot the issue.
Resolved: Netgear Router Firmware Update Failure
Call Your Internet Service Provider
A weak internet connection is the main reason behind endless technical issues. There’s no doubt that an internet issue might have led you to where you’re standing right now. Thus, to take care of the internet issue, contact your ISP. Chances are that the internet issue might be from the end of your ISP. If it is, then ask him to send an agent over to your house to fix it.
Once the internet issue is fixed, access the routerlogin.net setup page and see whether you’re able to update the firmware of your device or not.
Check the Connection Between Your WiFi Devices
Another common reason that’s stopping you from performing Netgear firmware update is an unstable connection between your router and modem. To troubleshoot the issue, make sure that the connection between your WiFi is stable.
If you’ve used an Ethernet cable to create a connection between your Netgear router and modem, then ensure that is it free of any damages. In case it is damaged from any end, then get the cable changed immediately.
Perform Factory Default Reset
Are you still stuck with the Netgear router firmware update failure issue? No problem! Restoring your device to its factory default settings will surely help you in getting rid of the issue. Follow the instructions given below to reset your WiFi device:
- Try to locate the Reset button at the bottom of your device.
- Once found, take a pin-like object to press the Reset button.
- Now, give your device some time to get restored to its default mode.
Note: You can also reset your Netgear WiFi router using the default router login IP.
Once you are done going through all the troubleshooting steps mentioned in this article, use the default routerlogin.net admin details, log into your device, and perform Netgear router firmware update.