Does your Netgear router keep rebooting? If you nod in yes, then don’t sweat over it! Sometimes, even the best-performing Netgear router can become a pain in your head. Thus, rather than banging your head against a wall, it is always better to find a better deal with better option, what do you think? If you agree with us, then walk through this blog post.
Here, you will find different ways through which you can easily resolve the “Netgear router keeps rebooting” issue. So, without further discussion, let’s get started!
Troubleshooting: Netgear Router Keeps Rebooting Issue
Your Netgear Router is Overheated
One of the major reasons why your Netgear router keeps on rebooting again and again is because of overheating. So, to cool it down, disconnect all the devices that are connected to your Netgear router.
Once done, power cycle your Netgear router. To get the job done, unplug your Netgear router from the wall socket, wait for a few minutes, and plug it back in again. As soon as you are done with the power cycling process, see whether the issue is fixed or not. If not, then scroll down to the next troubleshooting tip.
Pro Tip: After power cycling your Netgear router, it is suggested to ping 192.168.1.1 to check your internet connection.
Check Your Cable Connections
As soon as you are done with the step 1, it is suggested to check the cable/ Ethernet connections of your Netgear router. So, start by cross-checking the router’s power adapter. Is it properly plugged in? Is it in working condition? If yes, now check the Ethernet connection you have made between your Netgear router and the existing modem/ router. Ensure that the connection is secure and finger-tight. Apart from that, make sure that you are using a non-damaged Ethernet cable.
If you are facing issues while connecting the Netgear router to your existing modem/ router using an Ethernet cable, you are free to connect them wirelessly.
Once you’re done with this step, try to access the router login page on your PC or laptop using 10.0.0.1 IP.
Place Your Netgear Router in a Cool Area
The next troubleshooting tip in our post to fix Netgear router keeps rebooting issue is to check the placement of the device. Have you placed your Netgear router at its ideal location? Think about it! And if you have placed your Netgear router in a corner, inside a cabinet, or under a table, then it’s high time that you relocate it.
Yes, you read it right! The placement of your Netgear router plays a very important role when it comes to its performance and proper functioning. So, in order to make the most out of your Netgear router, ensure to place it at the center-most area of your house and that too within range of your existing modem/ router.
Update the Router’s Firmware
Another reason why your Netgear router keeps rebooting might be because of an outdated firmware version. Therefore, to get the most out of your Netgear router, ensure that its firmware is latest and up-to-date.
Wondering how to update Netgear router firmware? Wonder no more! Navigate to the Netgear Genie setup wizard using 192.168.1.0 IP for the on-screen firmware update instructions.
Pro Tip: You can also refer to the Netgear router manual for firmware update instructions.
The Final Words
So, that was all about our post to fix the “Netgear router keeps rebooting” issue. On the off chance if you still have any doubts or queries, feel free to get in touch with our highly-qualified technicians via comments. Our experts are available at your service 24×7.