With a laser, you can remove rust and clean it. Laser rust removal, which is a type of laser cleaning, can clean metal parts very well. When you use a fibre laser cleaning system, you can quickly and thoroughly get rid of dust and other pollutants from metal.
Laser rust removal is an excellent alternative to manual and chemical cleaning because it removes rustwith more precision and saves money over time. As a bonus, it’s a great way to help the environment, too. Laser technology is used laser rust removal technique.
Laser cleaning is good for the environment because it doesn’t use any consumables or chemicals to remove the rust on the surface. We can’t do anything else because we have to follow environmental rules. Another good thing about pulsed fibre lasers is that they don’t use much power.
Laser cleaning indeed makes a small amount of dust in the air. A device that removes dust, which we can provide and set up for you if you need it, can quickly get rid of it.
Conveyor automation with laser marking
In this case, it’s a waste of time to clean every part of the car yourself. If you automate it, you’ll pay less than if you do it by hand. Because laser cleaning can be fully or partially automated, there is no longer any manual labour. We can also work with your system integrator to develop a custom solution for your facility.
It will save you a lot of time and money to do less upkeep.
The same thing happens to all people who use it with abrasive blasting: their equipment is permanently being blocked by other equipment. They need to be checked and cleaned regularly because of things like sand, the state of the nozzle, or the fact that they need to be replaced.
Lasers in manufacturing environments are very safe when used with a dust extractor system and a Class-1 laser safety enclosure, but they can still be very dangerous.
Because of these safety measures, people who work with JNCT LASER don’t need to wear personal protective equipment for their respiratory, hearing, or physical health. They’re also no longer in charge of handling dangerous goods.
What is the process of getting rid of rust?
It is essential to know that each substance has a unique set of characteristics that determine how it reacts in different situations. When removing rust from metal, you need to pay attention to the ablation threshold.Laser beams strong enough to remove rust can also not damage the metal that is being cleaned. Because a low-intensity laser beam is used to get rid of rust, the Laser’s energy is spread out as heat instead of absorbed by the metal.
Rust and dirt don’t show up on the new surface.
Laser power and how thick the rust is affecting how quickly the rust is removed. We can remove typical light rust at 50 cm2/sec with our high-power tools. Remove even the heaviest rust with a speed of 5 cm/s. A surface is cleaned by shining nanosecond-long pulses of laser light at it. As the laser light interacts with the contaminants, they will either turn into a gas or be dislodged from the surface because of the pressure. This is how it works:
Laser cleaning is the best way to get down to the metal of your product and get rid of all the dirt and grime. Adapt Laser is a company that specializes in laser cleaning technology and how to use that technology to clean things. To use this technique in any other way, we need the correct settings and equipment. This way, we don’t have to change the quality of our cleaning process.
Laser technology also has a lot of other benefits, like being simple to use, safe, easy to automate, and quiet. It is also safe and reliable. It doesn’t need to be cleaned up after if you use it. It is cheap to run, and it is safe for the environment.