There aren’t many more efficient ways to get from the main level of your home up to your loft than through the use of loft ladders. They’re functional and take up less space than a flight of stairs. Best of all, they’re usually removable.
The difficult part is finding a way to fit wooden loft ladders and loft ladders for small spaces. While cabin loft ladders and ship ladders for lofts take up little space, if they don’t fit correctly then they’ll be unsafe for use in your home or cabin.
The good news is that you’ve come to the right place to learn more about fitting loft ladders for your home. Continue reading to learn everything you need to know about fitting every type of loft ladder, from loft ladders with handrail to loft ladders for small spaces.
Table of Contents
Tools You’ll Need
There are certain tools that you’ll need for fitting loft ladders in your home. It is likely that it won’t be possible to create a loft ladder that fits your existing loft hatch, so be sure to have the tools on hand that you’ll need for potentially making a new loft hatch.
Here is a list of some of the most important tools that you’ll need for the job.
- Tape measure
- Power drill
- Craft knife
- Carpenter’s square
These tools will help you to create a loft hatch that suits the loft ladder that you’ve purchased for your home. Be sure to read the instructions that come with the loft ladder to make sure that you install the ladder correctly. For a great selection of ladders be sure to check out www.instaloft.co.uk/loft-ladders.
Create a Loft Hatch
In the case that you don’t already have a suitable loft hatch, you’ll want to scout out the perfect area to install one. There are a number of factors that you should consider when picking out the best spot to install your loft hatch. A good place to start is by checking the loft ladder that you’ve purchased to see what size the opening to the loft needs to be.
You’ll want to make sure that the hatch is ample size to contain the loft ladder while still providing a small gap on each side that will allow for movement and maneuvering.
Another good idea is to make sure that you’ll have ample headroom when entering the loft. If you choose a spot without much headroom you’ll likely bang your head on the roof of the loft or attic as you ascend the loft ladder. Find a place that will provide you with space when you enter the loft.
From there, once you’ve found a place that seems like a good spot for a loft hatch, drill a hole for practice. This will help you see where it comes out. Once you’ve done that, check the hole from above and below. It is possible that the spot you’ve picked out will be less than ideal when viewed from below.
Fit the Loft Ladder
Now that you’ve got a loft hatch in place to install your loft ladder, there are some additional steps that you need to take. First, you’ll want to add some battens to the frame. These battens will help to support the loft hatch so that the weight put on the ladder won’t cause damage or lead to collapse.
The best way to install battens is by nailing a length of wood to all sides of the opening you’ve created for the loft hatch. It is vital that you ensure that these battens are secure and level with one another before moving on to the next step of the installation process.
Once you’ve confirmed that the battens are level and secure you can proceed with placing the loft ladder assembly in the floor opening in a way that is supported by the battens you installed earlier. You’ll want to confirm from below that the loft ladder assembly is flush with the battens for the best and safest installation.
Secure the Loft Ladder
After you’ve confirmed that the loft ladder is flush with the battens that you installed to the opening of your loft hatch, the next step you’ll want to take is securing the loft ladder in place. To do these, start by drilling at least two holes into each side of the frame that you made. For longer sides, you should use three holes.
Once you’ve drilled the holes into the frame, start screwing the loft ladder assembly into place. If you don’t have screws and a screwdriver then nails and a hammer will also be suitable for this task.
It is important that you confirm that the loft ladder is secured to the battens and frame before you or anyone else attempts to use it. This is the best way to ensure the safety of you and those around you.
One other thing that you need to consider is the length of the loft ladder and the height between your ceiling and your floor. Depending on the loft ladders you chose for your home, it is possible that the loft ladder will be too tall. This means that you’ll have to cut the lower section to fit your home.
Once you’ve cut the ladder to fit your home perfectly, test out the loft ladder to make sure that it is secure. If it is secure, you’re good to begin using it as a way to access your home’s loft for storage or residence.
Start Using Loft Ladders Today
Loft ladders are a great way to access the loft and attic areas of your home. They allow you to have more storage or another living space within your home. Before you can do that, it is important that you have a safe and sturdy loft hatch that is suitable for the wooden loft ladders that you chose for your home.
It is vital for the safety of everyone involved that you confirm that the loft ladder and the loft hatch suit each other and that the loft ladder is secure before you start using it.
For more helpful and informative articles on a range of different topics, be sure to check out more of our website.